Y. Berger & Co. AB has registered our UK company, “Eureka Safety UK” and are now ready to deliver “Delivered Duty Paid” anywhere in the United Kingdom!

The new set up allows for either direct orders from our Sweden stock, but imported into UK, or to take on production orders direct from the factory but still imported into the UK.

October is here and for those of us in the northern hemisphere, the temperature has started to drop, and the suns path falls quicker to the horizon. Winter is just around the corner!
Keep your hands warm and protected from mechanical risks with Eureka’s range of cold environment gloves.

Our 15-3 Winter Cut offers cut level D/ANSI A4 cut protection in a highly dexterous form-fitting glove. Cold and wet? Our super comfortable winter PU Grip offers great grip in a waterproof glove for moderate winter climates.
Colder still? Our 1310-2 Double Shell Nitrile offers fantastic insulation and grip in a bright orange colour and reflective print for visibility in the longer winter darkness. For the coldest working environments our MF Nordic Winter will keep your hands warm with the glove to mitten conversion.

Using power tools outdoors? Cold temperatures and vibration are not a good match. Cold hands while using vibrating tools can increase the risk of permanent vibration damage. Keep your hands warm and protected using our winter versions of Impact Vibration and Vibration Flexi.

Check out the rest of our line-up to find the perfect glove for you.

Any questions? Don’t hesitate to contact your Eureka representative!

Vibration reduction to reduce the risk of HAVS (Hand Arm Vibration Syndrome) is a complicated topic. There are many aspects to consider when choosing the correct glove for you tool. At Eureka we like to use the visualisation that tool vibrations are akin to the ocean – large swells, waves, and ripples all representing the dimensions and complexity. The most impacting factors being tool vibration simplified as RPM (revolutions per minute), rotational or impacting vibrations, working material, environmental temperature, and environmental stress factors such as ambient noise level.

Accounting for these factors determines the level of accuracy when choosing the correct glove. The higher the potential vibration exposure, the higher the level of accuracy is recommended.

At Eureka we have categorised the selection accuracy into 3 levels:

Accuracy Level 1 (Lowest):

15,000- 20,000 RPM. Does your tool rotate faster or slower than this range? Impact Vibration range for faster and high energy impacting tools, Flexi range for slower.

Accuracy Level 2 (Medium):

Using the Eureka Tool-Type dot chart along with the Eureka Vibration Tool Acceleration Overview (available on customer page only) for determining the appropriate glove.

Accuracy Level 3 (Highest):

On-site measurements and in-depth analysis. At this level, our experts will visit your premises and measure the exact “in-action” vibration exposure to record the most accurate data. This data is then relayed back to our HQ where it is analysed and a full report per tool with glove recommendations is generated.

For odd jobs and occasional vibrating tool exposure, accuracy level 1 or 2 to select a glove model may suffice. For repeated work, industrial use, exposure over long periods, accuracy level 3 is strongly recommended. If in doubt, please contact us at Eureka and we can assist you in selecting the appropriate protection.

Our Sweden warehouse will be closed for 1 week with a period of reduced order processing.

• W27 / Week of July 4th: Normal operation
• W28 / Week of July 11th: Normal operation
• W29 / Week of July 18th: Reduced hours
• W30 / Week of July 25th: Reduced hours
• W31 / Week of August 1nd: CLOSED
• W32 / Week of August 8th: Reduced hours
• W33 / Week of August 15th: Back to normal operation

Be sure to get your orders in with us in good time!

On our journey towards a more digital future, some steps are small and some are large.

At the end of May we will be upgrading our ERP system to a more advanced and efficient system. 

The switch-over will create a temporary disruption in our processing of orders and logistics. If your stock levels are low and wish to place an order please do so before Friday the 20th of May. 

Important dates: Wednesday 25th May -> Tuesday 31st May. No orders will be processed during this time.